High Voltage Meters measure AC and DC voltages of up to 30kV with high accuracy. The meter input impedance is as high as 1000 M ohm, making the meter suitable for measurement of voltages of high source impedance circuits.

Current transformer clamp meters only measure AC current. This is the original type of clamp meter. Hall Effect clamp meters can measure both AC and DC currents. Most modern clamp meters are Hall Effect clamp meters.A clamp meter is an electrical tester that combines a basic digital multimeter with a current sensor. Clamps measure current. Probes measure voltage.

FEATURES

Adopt latest CT technology and integrated mask digital technology
Have peak value maintaining, data maintaining, data memory function
Easy to install and remove with power on
Insulation rod has the characteristics of moisture resistance, high temperature resistance, impact resistance, bending resistance, high insulation and scalability.
Can accurately measure 0.00mA-1200A current or leakage current
Can test high and low voltage changing ratio, respectively test the first loop and secondary loop high and low voltage current, and then obtain the voltage change through manually calculation.
Wireless transmission distance 30m, can transmit through building barriers
Integrated design ensures uninterrupted year-round high precision, high reliability and high stability test.

PARAMETERS

Electrical parameters
Power supply	Ammeter: DC6V Alkaline Dry Battery (1.5V AAA X 4), Receiver: DC7.5V Alkaline Dry Battery (1.5V AA X 5), working 10 hours
Test mode	Clamp CT, integral approach
Transmission mode	Wireless transmission, the maximum distance of straight line transmission is about 30m
Display mode	4 bit LCD display, with backlight function
Sampling rate	2 times/second
Measurement scope	0.00mA-1200A (50/60Hz automatic)
Resolution	0.01mA
Shift	0.00mA-1200A automatic shift
Accuracy (23°C±5°C, below 70%RH)	0.000mA-120.00A: ±1%±3dgt 120.00A-1200.0A: ±1%±5dgt
Line voltage	Below 69KV line test (with 5 insulation rods operation)
Data memory	99 sets
Automatic shutdown	15 minutes after boot
Battery voltage	<4.8V alarm active
Insulation strength	AC 100kV/rms (between the 5th insulation rod and high voltage Ammeter core)
Structure	Anti-drip type II
Safety provisions	IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT III (600V), IEC61326(EMC standard)
Mechanical parameters
LCD dimensions (mm)	47×28.5
Meter dimension (LxWxH) (mm)	87×262×37
Meter weight	2.5kg (including insulation rod and battery, tester 335g)
Clamp dimension (mm)	Ф50
Insulation rod dimension	φ50mm, 1m/piece (5m)
Environmental conditions
Working temperature	-25°C to 40°C
Working humidity	Below 80%Rh
Storage temperature	-10°C to 60°C
Storage humidity	Below 70%Rh
Accessories
Ammeter	1 pc
Receiver	1 pc
Ammeter box	1 pc
Telescopic insulation rod (5m)	1 pc
Battery	Rechargeable Alkaline Dry Battery(AA X 5+AAA X 4)
Model	Description
GF2011	Wireless
GF2011B	Base Display

Product Tags:

1mA 1000A Ammeter Recorder Wireless Current Clamp Meter

Zero Sequence Current Transformer

Split Core Current Transformer

Instrument Current Transformer

AC Current Probe

Clamp On Current Transformer

Flexible Ct Clamps

Outdoor Voltage Transformer

Digital Power Meter

CT PT Analyzer

Electric Meter Calibration

Secondary Current Injection Test

Portable Meter Test Equipment

Power Quality Analyzer

Electrical Test Equipment

Ammeter Recorder

Electrical Power Calibrator

Primary Injection Test Equipment

Protection Relay Test Equipment

1mA 1000A Ammeter Recorder Wireless Current Clamp Meter

FEATURES

PARAMETERS

digital power clamp meter

dc digital ammeter

electric meter analog