Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.
Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd. an exclusive current transformer, split core current transformer, current clamp & voltage transformer manufacturer.
Add to Cart
P8 Accuracy 0.2 % 5A Split Core AC Clamp On Current Transformer 0.333V for Project
The P8 current clamp ct is an affordable & durable mini current clamp ct for measurements to 10A AC. This current clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC current clamp ct is a cheap probe to be used in power and low level current measurement, measuring around cable bundles, power load monitoring, waveform analysis, energy meter calibrator, phase angle meter, ,measuring in breaker panels, HVAC and data logging/recording
Current probes are key to the successful design of electrical devices, testing instruments, and electronic parts. Probes work with testing devices are ideal for measuring currents with high accuracy making them indispensable tools for evaluating current consumption and control current. In recent years, customers are seeking current probes with high sensitivity to increase the accuracy of design and verification.GFUVE offers wide range of current sensors for its portable power analyzers. The products included in this range can be used to measure current levels from a few mA to up to several thousand amperes.
GFUVE P8 Series of Clamp-On Current Transformer's are designed for fast and easy installation. Clamp-On CT uses Permalloy Magnetic Core or Silicon Amorphous Core, with characteristics of small size. high precision, good stability and strong anti-interference ability.
Why Choose GFUVE Current Probes. The Most Comprehensive Line of Current Probes. GFUVE ® the world's largest supplier, offers current probe models capable of accurately measuring from the low µA to kA range. A wide variety of configurations and jaw sizes are available. Probe types include iron core, Hall Effect, Flux Gate, and Rogowski etc.
Clamp-On Current Transformers are the one-handed operating solution for temporary energy audits or long-term energy studies. The GFUVE 10A Clamp On Current Transformer is specifically designed to offer broad utility in a compact shape. These CTs deliver high-accuracy, high-sensitivity, versatility, and low phase shift.
Features
Measurement range of 1mA to 20A AC
Improved ergonomic design and easy operation
High content nickel metal core
Low phase shift for power measurement
Small, compact size
Jaw opening accommodates conductors up to 8mm diameter
Designed for DMMs, loggers, recorders and oscilloscopes
40Hz to 2kHz response
1mA/A AC output signals
Designed to EN 61010, 600V CAT III safety standard
UL, CE mark
Applications
Power quality measuring
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Phase angle meter
Measuring in breaker panels
HVAC
Data logging/recording
Parameter
| Electrical parameters | |
| Ratio | 2500: 1, 2000:1 or 1000:1 (customized) |
| Accuracy class | 0.2%, 0.5% |
| Phase shift | <10' |
| Primary current | 0 - 10A AC |
| Secondary current | 0 - 10mA AC (customized) |
| Secondary voltage | 0.25V, 0.5V AC |
| Max. Cont. Input current | 20A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 10mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 0.5V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 720 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | clamp type |
| Output mode | lead output(2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 42× 139 × 20 |
| Weight (g) | 180 |
| Holding wire diameter (mm) | φ8 |
| Max. jaw opening (mm) | 8 |
| Color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photos
