Instrument transformers are high accuracy class electrical devices used to isolate or transform voltage or current levels. The most common usage of instrument transformers is to operate instruments or metering from high voltage or high current circuits, safely isolating secondary control circuitry from the high voltages or currents. The primary winding of the transformer is connected to the high voltage or high current circuit, and the meter or relay is connected to the secondary circuit.
Instrument transformers may also be used as an isolation transformer so that secondary quantities may be used in phase shifting without affecting other primary connected devices.
Current transformers (CT) are a series connected type of instrument transformer. They are designed to present negligible load to the supply being measured and have an accurate current ratio and phase relationship to enable accurate secondary connected metering.
Current transformers are often constructed by passing a single primary turn (either an insulated cable or an uninsulated bus bar) through a well-insulated toroidal core wrapped with many turns of wire. This affords easy implementation on high voltage bushings of grid transformers and other devices by installing the secondary turn core inside high-voltage bushing insulators and using the pass-through conductor as a single turn primary.

PARAMETERS

Technical parameters
Standards	IEC60044; IEC 61869; ANSI/IEEE C57.13
Rated primary current	4000-6000A
Rated load	≤60VA
Rated frequency	50Hz or 60Hz
Rated secondary current	5A or 1A
Rated short-time thermal current	100kA, 1S
Rated dynamic current	200kA
Rated insulation level	12/42/75KV
FS	≤10
Mechanical parameters
Material	Epoxy resin
Weight (kg)	38
Operating conditions
Operating temperature	-25°C to +55°C
Daily average temp	<+40°C
Storage temperature	-40°C to +70°C
Altitude	<1000 meters
Condition	No existence of severely begrimed, erosive and radioactive gas in the air. Permission of long-term operation under rated current.

TECHNICAL DATA

Ratied Primary Current(A)	Class Combination	Accuracy class and Rated output (VA)							Short-time thermal current (kA/S)	Rated dynamic current (kA)
		0.2S	0.5S	0.2	0.5	5P10	5P15	5P20
4000-6000	0.2(S)/0.2(S)/5P 0.2(S)/0.5(S)/5P 0.5(S)/0.5(S)/5P 0.2(S)/5P/5P 0.5(S)/5P/5P	10	10	30	50	60	40	30	100	200




	0.2(S)/0.2(S)/5P/5P 0.2(S)/0.5(S)/5P/5P 0.5(S)/0.5(S)/5P/5P	10	10	30	50	50	30	20

Overall Dimensions

Product Tags:

Medium Voltageresin Cast Current Transformer 10KV Accuracy Class 0.2 Various Size

Zero Sequence Current Transformer

Split Core Current Transformer

Instrument Current Transformer

AC Current Probe

Clamp On Current Transformer

Flexible Ct Clamps

Outdoor Voltage Transformer

Digital Power Meter

CT PT Analyzer

Electric Meter Calibration

Secondary Current Injection Test

Portable Meter Test Equipment

Power Quality Analyzer

Electrical Test Equipment

Ammeter Recorder

Electrical Power Calibrator

Primary Injection Test Equipment

Protection Relay Test Equipment

Medium Voltageresin Cast Current Transformer 10KV Accuracy Class 0.2 Various Size

current transformer ratio table

how to calculate current transformer ratio

current transformer accuracy class