
Add to Cart
High Quality Single Phase Stop electrical Digital Solar Power Meter / Power and Harmonics
Analyzer
FU2040 is a LCD display single phase stop digital solar power meter, metering and displaying all the measured parameters in one circuit and computing four quadrants energy. This model can work in wide temperature range.
Electrical parameters | |
---|---|
Power supply (AC/DC) | AC 85-265V / DC 85-330V Power consumption: <4VA |
Measurement parameters | Voltage (Ph-N); Voltage (Ph-Ph); Current; Frequency; PF; Active Power (W); Reactive Power (Q); Apparent Power (S) |
Computation | Forward / Reverse active / reactive power energy |
Measuring range | 30-600V, 0-6A, 45-60Hz |
Measuring accuracy | Frequency: 0.1% Electric energy: 0.5%, 1.0% Voltage : 0.2%±0.1V Current : 0.2%±0.001A Power : 0.5% ±0.4W Power Factor : 0.5% ±0.001 |
Display | LCD display; 3 display; 4 operation keys |
Communication | Support RS485 interface port, 32(128) networking, Modbus-RTU communication protocol. |
Programmable | Measuring system: 3P4W/3P3W etc Transformation ratio : PT, CT Communication: Address: 1-247; Baud: 1200-19200; Parity bit: N/E/O Energy: reset |
Connection mode | 3P4W, 3P4W BAL, 3P3W, 3P3W BAL, 1P2W, 1P3W |
Mechanical parameters | |
Dimensions (mm) | Mounting panel: 72x72 Thickness: 13 Depth: 60 |
Mounting | Panel mounting Trepanning: 68x68mm |
Environmental conditions | |
Temperature | -25 to +50°C |
Humidity | 20%-95%RH, without condensation |